Wiring car speakers is not a difficult task, but it is important to do it correctly in order to get the best sound quality from your system. Here are the steps you can follow to wire car speakers:

1. Determine the wiring configuration of your car’s audio system. Some vehicles have a factory amplifier, while others do not. If your car has a factory amplifier, you will need to wire the speakers to it. If your car does not have a factory amplifier, you can wire the speakers directly to the head unit.
2. Disconnect the negative terminal of your car’s battery to ensure that you do not accidentally short circuit any wires while working on the system.
3. Locate the wires that connect the head unit to the factory amplifier (if applicable) or to the speakers. These wires are usually located in the dashboard or in the trunk of the vehicle.
4. Cut the wires leading from the head unit to the amplifier or the speakers, leaving enough length on each wire to work with.
5. Strip the insulation off the ends of the wires using wire strippers or a utility knife.
6. Connect the positive wire (usually red or yellow) from the head unit to the positive terminal of the speaker, and the negative wire (usually black or white) from the head unit to the negative terminal of the speaker. If you are using an amplifier, connect the positive and negative wires from the amplifier to the corresponding terminals on the speaker.
7. Repeat the process for each speaker, making sure to connect the positive terminal of each speaker to the positive wire and the negative terminal of each speaker to the negative wire.
8. Once all of the speakers are wired, you can test the system to make sure it is working properly. Reconnect the negative terminal of the battery, and turn on the head unit. You should hear sound coming from all of the speakers.

I hope this helps! Let me know if you have any other questions.